more info

165 Amp AC ARC Welder * 110V, 60Hz * No Load Voltage: 48V * Current Range: 55-165 Amps * Rate Duty Cycle: 10% * Input Capacity @ 60%: 2.5KVA * Class of Insulation: F * Accessory: Electrode Holder w/ Cord, Earth Clamp, Power Supply Cord, Hammer, Brush more info

This quality arc welder is exactly what you need to get the job done right! Get professional results without paying the price. Provides consistent wire speed to make smoother welds! more info

The Hobart Handler 210 Wire Feed MIG Welder handles solid mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. 7 output voltage settings and infinite wire feed control enable fine tuning for the smoothest arc with less spatter. Volts: 230, Amps: 210, Duty Cycle: 30% @ 150 Amps, 23 Volts, Mig Ready: Yes, Wire Feed Speed Control: Yes, 40 – 700 IPM, Weldable Metals: Steel, stainless steel, flux corded and aluminum wires, Weld Thickness (in.): 24-gauge up to 3/8in. steel, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: No, Cart: No, Dimensions L x W x H (in.): 10 5/8 x 19 1/2 x 12 3/8 more info

TROY MIG135 135 Amp MIG & Wire Feed w/ Reg Welder Listed here, a new factory sealed Troy MIG135 Welder. This unit is ideal for MIG and Flux Core Welding and features a Range of Current between 25 – 135 Amps. This welding unit features an 8′ Torch Cable with Dual Gauge Regulator, operation from a 115V Plug. This unit run will run on gas or without gas when the Flux Core is engaged. See below for additional item details MIG135 Features. Professional gun with trigger control. Precise electronic wire speed control 0-600 rpm. 2 heat settings, top loads 4 spools of .030 to .035 wire. Welds 22 gauge. to 1/4 steel and 22 gauge. to 1/8 aluminum and stainless. Reversible polarity for gas MIG & Flux Core wire welding. Includes Welding torch, Ground clamp, Contact tip, 2 lb. spool of .030 flux core wire, Power cord and Wire brush with chipping hammer. Face shield & Gas Regulator. One-Year Warranty and 30 Day Max Tool Satisfaction Guarantee. more info

110V,single phase
For family electrodes welding
No Load Voltage: 48V
Range of current 45-100amp
Rated Duty: 10%
Insulation Class: H
Usable Electrodes:.1/16 to 3/32
Includes: Electrode holder, grounding cord with clamp, welding cable
Includes: Brush/hammer, Face shield more info

The Campbell Hausfeld WS0970 115-volt 70 Amp arc stick welder can weld mild or stainless steel from 18-gauge to 1/8-inch thick, and is ideal for use on boat trailers, wrought iron, or automotive sheet metal. It comes with a dual heat setting for use with welding rods, and its thermal overload protection automatically shuts off the welder at its duty cycle rating. A contoured face makes operating the arc welder easy, as do the carry handle and storage clips to hold the cables in place. The Campbell Hausfeld WS0970 welder is powered by a 115-volt current and generates 70 Amps of power. A built-in storage keeps accessories organized while cord management maintains secure storage. This welder includes a welding shield, hammer/brush, electrodes, and quick start guide. Campbell Hausfeld backs its welder with a 5-year limited warranty.

What’s in the Box
Welder, welding shield, hammer/brush, electrodes, and quick start guide. more info

*Uses self-shielding flux-core welding wire–no need for gas or gas regulator*On-board wire-spool storage with trigger-control line feed, infinitely adjustable wire speed*Operates on 120-volt AC/24A power; no special wiring required; 14 AWG CUL-listed power cord*Duty cycle 18% @ 60 amps, 10% @ 90 amps; wire capacity 0.035 or 0.030*Includes torch with 7′ cable, 6′ 8AWG ground cord & clamp, flux-core welding wire, nozzle & tipEasy-to-operate MIG welder for sheet metal and light steel, comes ready to weld right out of the box. Includes torch/cable, grounding cord & clamp, 4 spool 0.030 flux-cored welding wire, carry handle, nozzle and 2 copper tips. Dimensions 14-1/2L x 14H (with handle), 8W, 34 lbs. more info

Features: Professional gun with trigger control. Precise electronic wire speed control 0-600 ipm. 4 heat settings, side loads 4 spools of.030 to.035 wire. Reversible polarity for MIG and Flux core welding. Fan cooled for longer duty. Welds 22 ga. to 38 steel and 22 ga. to 14 aluminum and stainless. Includes: Welding torch, Ground clamp, Contact tip, 2 lb. spool of.030 flux core wire, Power cord, Wire brush with chipping hammer and Face shield. more info

When you need more than just a MIG machine, the Power MIG 350MP is the choice for you. Lincoln Chopper Technology delivers more welding processes ? MIG and flux-cored, along with excellent stick welding, TIG and advanced processes such as Power Mode? and Pulse-on-Pulse . In addition, future waveforms of special or improved welding processes can be downloaded into the Power MIG, making it expandable. This means the welder you buy today won?t be obsolete tomorrow. Factor in the simplicity and sophistication of synergic control, and you?ll agree ? no other power source in this category offers so much! THIS PRODUCT IS BUILT TO ORDER. IT CAN TAKE UP TO 15 BUSINESS DAYS TO SHIP TO YOUR HOME OR BUSINESS. more info